Difference between revisions of "Project File:Overland Flow – Required"
From Gsshawiki
(Created page with "==3.3.1 Required Inputs== Overland roughness coefficients must be assigned to every cell in the active grid. Overland roughness coefficients may be assigned as either a sin...") |
(→3.3.2 Optional Inputs) |
||
| Line 36: | Line 36: | ||
|- | |- | ||
| <pre>INIT_ELEV_HEAD ##.##</pre> || ''real'' || m || 0.0 || Specifies an initial water surface (meters above sea level.) Used when starting models adjacent to the ocean in conjunction with overland boundary conditions. | | <pre>INIT_ELEV_HEAD ##.##</pre> || ''real'' || m || 0.0 || Specifies an initial water surface (meters above sea level.) Used when starting models adjacent to the ocean in conjunction with overland boundary conditions. | ||
| − | |} | + | | |
| + | | <pre>OVERLAND_MOMENTUM ##.##</pre> || ''none'' || || No || Use the momentum formulation from Bates et al. 2010 to compute overland flow. | ||
| + | | <pre>OVERLAND_STRICT_DT ##.##</pre> || ''none'' || || No || Use a strict application of the overland flow timestep from Bates et al. 2010. | ||
| + | } | ||
To include wetlands, which are optional, simply set up a wetlands table. The wetlands are turned on if the table is present and has a valid index map associated with it. | To include wetlands, which are optional, simply set up a wetlands table. The wetlands are turned on if the table is present and has a valid index map associated with it. | ||
Revision as of 22:33, 29 January 2018
3.3.1 Required Inputs
Overland roughness coefficients must be assigned to every cell in the active grid. Overland roughness coefficients may be assigned as either a single uniform value, from a GRASS ASCII grid map, or from the Mapping Table. Only one option should be selected. Do not specify either of these cards if roughness values are to be read from the Mapping Table file.
| Card | Argument | Units | Description |
|---|---|---|---|
MANNING_N ##.## |
real | none | Constant value of Manning’s roughness coefficient to be applied to the entire watershed. Mutually exclusive with ROUGHNESS and Mapping Table file assignment. |
ROUGHNESS "filename.ext" |
map name | Name of GRASS ASCII map containing spatially-varied overland flow Manning’s n values. Mutually exclusive with MANNING_N and Mapping Table file assignment. |
3.3.2 Optional Inputs
The user can select the overland flow routing scheme. An overland retention depth may also be specified at the discretion of the user. Retention depth can be assigned as a single uniform value, from the Mapping Table, or from a GRASS ASCII grid map. Only one option should be specified.
| Card | Argument | Units | Default Value | Description | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
OVERTYPE [type] |
character | EXPLICIT | Overland routing scheme, one of: EXPLICIT, | ||||||||||||
RETEN_DEPTH ["filename.ext"] |
map name or none |
Specifies distributed retention depth (mm) over the watershed. If followed by a map name, the file will be read in as the retention depth map. If no input is specified, then the retention depth map is generated from the Mapping Table file. Mutually exclusive with RETENTION. | |||||||||||||
RETENTION ##.## |
real | mm | 0.0 | Specifies the uniform retention depth to be used for all overland flow cells. Mutually exclusive with RETEN_DEPTH. | |||||||||||
READ_OV_HOTSTART "filename.ext" |
map name | Name of map that specifies initial depths, m, of every overland flow cell | |||||||||||||
WRITE_OV_HOTSTART "filename.ext" |
map name | Name of map that specifies overland depths at the end of the simulation, m, of every overland flow cell | |||||||||||||
OV_BOUNDARY |
none | Run with overland boundary conditions turned on. The boundary conditions are specified in the mapping table. | |||||||||||||
INIT_ELEV_HEAD ##.## |
real | m | 0.0 | Specifies an initial water surface (meters above sea level.) Used when starting models adjacent to the ocean in conjunction with overland boundary conditions. | OVERLAND_MOMENTUM ##.## |
none | No | Use the momentum formulation from Bates et al. 2010 to compute overland flow. | OVERLAND_STRICT_DT ##.## |
none | No | Use a strict application of the overland flow timestep from Bates et al. 2010.
} To include wetlands, which are optional, simply set up a wetlands table. The wetlands are turned on if the table is present and has a valid index map associated with it.
GSSHA User's Manual
|
