Difference between revisions of "Project File:Subsurface Drainage Network Optional"
From Gsshawiki
(ββ3.12.1 Required Inputs) |
|||
| Line 7: | Line 7: | ||
! Card !! Argument !! Description | ! Card !! Argument !! Description | ||
|- | |- | ||
| β | | <pre>STORM_SEWER</pre> || ''filename.spn'' || | + | | <pre>STORM_SEWER</pre> || ''filename.spn'' || Card specifies that subsurface drainage be performed and identifies the input file that describes the newtork connectivity and physical description. |
|} | |} | ||
Revision as of 20:18, 24 June 2013
Contents
3.12.1 Required Inputs
The following cards are REQUIRED for the simulation of subsurface drains.
| Card | Argument | Description |
|---|---|---|
STORM_SEWER |
filename.spn | Card specifies that subsurface drainage be performed and identifies the input file that describes the newtork connectivity and physical description. |
3.12.2 Optional Inputs
The following cards are REQUIRED for the simulation of subsurface drains.
| Card | Argument | Description |
|---|---|---|
GRID_PIPE |
filename.gpi | File that contains the information needed to link the network to the groundwater model. Required when simulating tile drains. |
HIGH_HEAD_RELEASE |
none | Allows flow back to the overland from the storm drains during system surcharge. |
SUPERLINK_C_OPT |
none | Specifies that GSSHA assigns the proper node spacing within superliks. |
SUPERLINK_DRAINMOD |
none | Specifies the method used in DRAINMOD be used to compute flows into tile drains. |
3.12.3 Output Cards
The following cards are REQUIRED for the simulation of subsurface drains.
| Card | Argument | Description |
|---|---|---|
SUPERLINK_JUNC_LOCATION |
filename | File that defines the junctions for output. |
SUPERLINK_NODE_LOCATION |
filename | File that defines the nodes for output. |
SUPERLINK_JUNC_FLOW |
filename | File that contains the time series ouput data for the junctions listed in SUPERLINK_JUNC_LOCATION. |
SUPERLINK_NODE_FLOW |
filename | File that contains the time series ouput data for the nodes listed in SUPERLINK_NODE_LOCATION. |
GSSHA User's Manual
- 3 Project File
- 3.1 Required Inputs
- 3.2 Mapping Table β Optional
- 3.3 Overland Flow β Required
- 3.4 Interception β Optional
- 3.5 Rainfall Input and Options β Required
- 3.6 Infiltration β Optional
- 3.7 Channel Routing β Optional
- 3.8 Continuous Simulations β Optional
- 3.9 Saturated Groundwater Flow β Optional
- 3.10 Soil Erosion β Optional
- 3.11 Constituent Transport β Optional
- 3.12 Subsurface Drainage Network β Optional
- 3.13 Output Files β Required
