Difference between revisions of "Alternate Run Modes:Efficient Local Search"
Beskahill2 (talk | contribs) (→Heading) |
Beskahill2 (talk | contribs) (→Efficient Local Search) |
||
| Line 5: | Line 5: | ||
gssha –slm case.pst | gssha –slm case.pst | ||
| − | where case.pst is the name of the modified control file. The active user is referred to the technical report ERDC-CHL-TR-12-3, and its related appendix material and example problem files, for several examples which demonstrate in a clear and practical manner how to use various functionalities associated with the independent ERDC implementations of the LM/SLM local search methods, and also brief descriptions of the various output files that are associated with a LM/SLM supervised GSSHA model calibration run. | + | where case.pst is the name of the modified control file. The active user is referred to the technical report [http://www.gsshawiki.com/gssha/Alternate_Run_Modes:ERDC_Automated_Model_Calibration_Software#A_Practical_Guide_to_Calibration_of_a_GSSHA_Hydrologic_Model_Using_ERDC_Automated_Model_Calibration_Software_-_Efficient_Local_Search ERDC-CHL-TR-12-3], and its related appendix material and example problem files, for several examples which demonstrate in a clear and practical manner how to use various functionalities associated with the independent ERDC implementations of the LM/SLM local search methods, and also brief descriptions of the various output files that are associated with a LM/SLM supervised GSSHA model calibration run. |
[http://www.gsshawiki.com/gssha/File:Test_prob_slm.zip Example problem files prepared for a SLM supervised GSSHA alternate run mode model calibration run], which are supplied for use as a go by | [http://www.gsshawiki.com/gssha/File:Test_prob_slm.zip Example problem files prepared for a SLM supervised GSSHA alternate run mode model calibration run], which are supplied for use as a go by | ||
Revision as of 19:55, 10 April 2012
Efficient Local Search
As previously mentioned, this GSSHA alternate run mode employs the independent ERDC implementations of the LM/SLM local search methods. There is no additional information that must be prepared for this specific GSSHA alternate run mode. The syntax required to use this alternate GSSHA run mode for GSSHA model calibration is:
gssha –slm case.pst
where case.pst is the name of the modified control file. The active user is referred to the technical report ERDC-CHL-TR-12-3, and its related appendix material and example problem files, for several examples which demonstrate in a clear and practical manner how to use various functionalities associated with the independent ERDC implementations of the LM/SLM local search methods, and also brief descriptions of the various output files that are associated with a LM/SLM supervised GSSHA model calibration run.
Example problem files prepared for a SLM supervised GSSHA alternate run mode model calibration run, which are supplied for use as a go by
GSSHA User's Manual
- 18 Alternate Run Modes
- 18.1 MPI and OpenMP Parallelization
- 18.2 Simulation Setup for Alternate Run Modes
- 18.3 Batch Mode Runs
- 18.4 Automated Calibration with Shuffled Complex Evolution
- 18.5 Monte Carlo Runs
- 18.6 ERDC Automated Model Calibration Software
- 18.6.1 Efficient Local Search
- 18.6.2 Multistart
- 18.6.3 Trajectory Repulsion
- 18.6.4 Effective and Efficient Stochastic Global Optimization
- 18.7 Inset Models
